3D Welded Mesh Fence with Peach Post: Specifications, Components, and Installation Guide
3D Welded Mesh Fence with Peach Post: Specifications, Components, and Installation Guide
A 3D welded mesh fence with peach post combines a welded wire panel with profiled steel posts designed to hold the panels in place. For buyers, the main decisions are panel dimensions, wire and coating specifications, post spacing, fixing method, and the foundation suited to the site. As an initial reference—not a universal standard—projects may consider a 50 × 200 mm mesh opening, 4–5 mm wire diameter, and post spacing of approximately 2.5–3 m. Confirm final dimensions against the supplier’s drawings, wind conditions, ground, and local requirements before ordering.
For more information, please visit our website.
Guide Summary
- A complete system usually includes welded mesh panels, peach-profile posts, panel clips or clamps, and suitable post foundations.
- Panel height, wire diameter, coating, post design, and fixing details should be specified together.
- Installation depends on accurate setting-out, stable foundations, consistent post alignment, and secure panel fixing.
- Price, minimum order quantity, and lead time depend on the configuration, order volume, coating, packaging, and delivery destination.
Who This Guide Is For
This guide is intended for importers, distributors, fencing contractors, and project procurement teams evaluating a 3D welded mesh fence with peach post. It helps buyers prepare a usable specification and identify installation questions before requesting a quotation. It is also relevant to project owners comparing perimeter-fencing options for commercial, industrial, institutional, or residential sites. The right configuration depends on the intended use and site conditions rather than the product name alone.
How the System Is Built
Welded mesh panels
The panel is made from horizontal and vertical steel wires joined at their intersections by welding. Pressed V-shaped bends, often called folds or V-bends, add shape to the panel and can improve its rigidity compared with a flat panel of otherwise similar construction. Panel height, width, wire diameter, mesh opening, and bend arrangement are specification points to confirm with the manufacturer. These details affect panel weight, handling, appearance, and compatibility with the posts and fixings.
Peach-profile posts and fittings
A peach post is a shaped metal post with a profile used to support and secure the mesh panels. The term describes a post style, so buyers should request a cross-section drawing and confirm the post dimensions, wall thickness, finish, and panel-fixing arrangement. Depending on the system design, panels may be attached using clips, clamps, brackets, or other specified fittings. Ask whether the quotation includes all required hardware, post caps, and any special corner, end, or gate posts.
Materials and protective finishes
Panel and post materials are commonly specified as steel, with corrosion protection selected for the exposure conditions and project requirements. Available finish options may include galvanized steel, powder-coated surfaces, or a combination of metallic coating and an exterior finish; the exact process should be confirmed for each component. Do not assume that the panel and post have identical coating layers or coating weights. Request written details for the wire, post, fittings, color, and any applicable inspection or acceptance criteria.
Key Specifications to Confirm
The figures below are examples to help structure an inquiry, not guaranteed Quanhao stock dimensions or mandatory industry standards. Suppliers may offer different configurations, and a project may require a nonstandard design. Ask for a product drawing and bill of materials so the panel, posts, fittings, and foundations can be checked as one system. Where appearance or interchangeability matters, also confirm color reference, tolerances, and packaging requirements.
| Specification | Example or decision point | What the buyer should verify |
|---|---|---|
| Mesh opening | 50 × 200 mm example | Opening orientation, clear dimensions, and any project-specific security or visibility requirements |
| Wire diameter | 4–5 mm example | Whether the stated diameter refers to the core wire or finished coated wire |
| Panel dimensions | Height and width to suit the layout | Panel size, bend locations, edges, and fit at corners or slopes |
| Post spacing | Approximately 2.5–3 m as an initial layout reference | Compatibility with panel width, wind exposure, post design, and fixing positions |
| Finish and color | Selected coating system and color reference | Finish on panels, posts, cut edges, and accessories; packaging protection during transport |
Match the Fence to the Application
For commercial and industrial boundaries, buyers commonly prioritize a consistent perimeter, manageable installation, and a finish appropriate to the environment. Schools, public spaces, and residential developments may place greater emphasis on appearance, visibility, access control, or compatibility with gates. Sites exposed to moisture, coastal air, chemicals, or frequent cleaning need particular attention to material and coating selection. A supplier can only recommend a suitable configuration when the buyer describes the exposure and intended service conditions.
On uneven ground, decide whether the fence will follow the slope, use stepped panels, or require another site-specific arrangement. These approaches can affect panel dimensions, post positions, bottom clearance, and the appearance of the finished line. Gate openings, corners, changes in direction, and transitions to walls also need to be shown on the layout. Share a site plan or measured run lengths when requesting a quotation.
Link to Quanhao
Installation Guide
1. Prepare the layout and materials
Mark the fence line, corners, ends, gates, and changes in direction before digging or setting posts. Check the panel dimensions and post spacing against the approved drawing, then count the panels, posts, fittings, and special posts required. Identify underground services and confirm local requirements for excavation and boundary placement. Keep the panels and coated components protected from damage while they are stored and handled.
2. Set posts and establish alignment
Install posts using a foundation method appropriate to the ground and project design, such as an engineered concrete footing or another approved fixing arrangement. Post embedment and footing dimensions should be determined from site conditions and project requirements rather than copied from a generic guide. Check the height, spacing, plumb, and line of each post before the foundation is allowed to set or the next installation stage begins. Misaligned posts can make panel fixing difficult and produce uneven gaps.
3. Attach panels and fittings
Position each panel at the specified height and use the designated clips, clamps, or brackets to attach it to the posts. Follow the supplier’s fixing sequence and hardware arrangement, especially at corners, ends, and gate interfaces. Check that the panels are level or follow the intended ground profile and that fixings are secure without distorting the mesh. Avoid cutting or altering coated components unless the approved installation method permits it and the exposed area can be appropriately protected.
4. Inspect the completed fence
Walk the fence line to check post stability, panel alignment, fixing completeness, ground clearance, and transitions around gates and corners. Confirm that no sharp or damaged edges have been left exposed and that the finish has not been visibly compromised during installation. Record any site adjustments and compare the completed work with the approved drawings. If the project has formal inspection criteria, use those criteria rather than relying only on a visual check.
Buyer Selection and Supplier Evaluation
Questions to answer before ordering
- What fence height, total length, panel width, and mesh opening does the project require?
- What wire diameter, post dimensions, coating system, and color should be quoted?
- How many corners, ends, gates, changes in level, and special posts are included?
- What site exposure, ground conditions, wind considerations, and installation method apply?
- What drawings, samples, packing details, inspection documents, and delivery terms are needed?
Ask suppliers to identify the exact scope of supply and list any exclusions, including foundations, gate hardware, or installation labor. Compare quotations on matching specifications rather than price alone, and check whether stated dimensions apply to the panel, post, or finished assembly. Request drawings before production when panel fit, color consistency, or project coordination is important. As a wire mesh fence manufacturer and supplier, Quanhao can discuss the requested configuration and prepare a quotation based on the project’s dimensions and sourcing requirements.
Pricing, MOQ, and Lead Time
There is no reliable single price for every 3D welded mesh fence with peach post. Cost can vary with panel size, wire diameter, coating, post specification, accessories, order quantity, packaging, and shipping destination. Minimum order quantity and production lead time also depend on the selected configuration and current order details. For a comparable offer, send the quantity, delivery location, required specifications, and target schedule together.
Conclusion and Next Steps
A 3D welded mesh fence with peach post is a coordinated system of mesh panels, shaped posts, fittings, finishes, and foundations. The best way to evaluate it is to confirm the panel and post specifications together, match the finish and installation method to the site, and verify the layout before production. Example values such as a 50 × 200 mm mesh opening, 4–5 mm wire, or 2.5–3 m post spacing are starting points for discussion, not substitutes for project engineering. Send Quanhao your fence layout, quantity, application, finish preference, and delivery destination to request a project-specific specification and quotation.
If you want to learn more, please visit our website 3D Welded Mesh Fence with Peach Post.


